LS Helix 3.0
Next-Generation Savonius Rotor
Next-generation Savonius wind turbine
The LS Helix 3.0 Vertical Axis Wind Turbine is LuvSide’s 3rd-Generation Savonius rotor model. Newly released in April 2020, the LS Helix 3.0 inherits the standard helix design but doubles the power capacity of the previous Savonius model.
Shaped to interact efficiently with aerodynamic flow, the LS Helix 3.0 wind turbine is able to start operating at low wind speed and achieve optimal performance without significantly higher demand for wind speed.
LS Helix 3.0
-
- 360° Wind Pickup
- No yaw system necessary
- Storm-Proof design
- Up to 180 km/h wind speed
- Low Environmental Impact
- Near-silent operation
- Operational Safety
- Overload clutch insurance
Turbine Details
| Nominal Power | 3.0 kW at 52 fps wind speed |
| Start-up wind speed | 18 fps (8.7 mph) |
| Rotor Diameter | 7.2 ft |
| Rotor Height | 13 ft |
Client Cases
Urban wind energy for companies and private grounds
As our Schleswig-Holstein distributor, Hans Otte installed our latest LS Helix 3.0 wind turbine at their company site in April 2020, when the Savonius wind turbine was officially launched.
While generating electrical power for the company, the LS Helix 3.0 wind turbine also serves as a real-live demonstration of urban wind energy solutions for clients and wind enthusiasts.
Supplying wind energy for open-door exhibitions and communities
Also part of our product launch, we installed our LS Helix 3.0 wind turbine at the event site of the Ingolstadt Landesgartenschau Fair 2020. The wind turbine supplies part of the electricity consumption of the fair and showcases how small vertical axis wind turbines can be integrated into various usage.
With all the components and transportation racks intact, it is possible to uninstall the turbine and simply re-install it elsewhere. Whether it is keeping the wind turbine where it stands or moving it to other sites, you have the power to decide.
Unique Features
Customize the colors of your blades
We build LuvSide turbines with colors hand-picked by our clients and quality, weather-proof paint selected by our engineering team. Most commonly, the blades are painted with two colors that represent your logo or preferences.
Built-in Overload Clutch security
All LuvSide turbines are equipped with an overload clutch that ensures operational safety. As an electrical magnetic tool, the overload clutch automatically detaches itself from the generator as the generator shuts down to prevent overloading. This mechanism safeguards the turbine’s mechanical components from damage caused by over-speeding rotors.
Because of the overload clutch, our Savonius turbines can operate with the highest security under stormy weathers in urban areas as well as offshore wind across the ocean.
Installing the LS Helix 3.0 Vertical Axis Wind Turbine
Our Helix vertical axis wind turbines are designed to be small, compact, and easy to install.
Each purchased wind turbine comes with a fully assembled rotor secured on a transport frame and the necessary electronic components. Depending on your preference, construction foundation, and the wind condition, the rotor can be either installed on the roof or on top of a mast. Installing our LS Helix 3.0 vertical axis wind turbine is exceptionally easy since the rotor is already put together.
Check out the video below for the complete installation process.
Your best solution to harness wind power
High Wind Endurance
With the 360° wind pick-up design and robust construction, LuvSide turbines function even under air turbulence and frequent changes of wind direction.
Low Environmental Impact
LuvSide turbines create no drop shadow, pose a smaller threat to flying animals, and emit lower operation noise.
Easy Maintenance
With the generator located only a few meters to the ground, it doesn’t take an army to install or maintain our turbines.
Flexible Mobility
From coastal regions to faraway islands, from mountainous areas to off-grid communities, LuvSide turbines can harvest wind power almost everywhere and anywhere.
Impeccable Quality
All LuvSide turbines are locally developed and built by our own engineers with strict quality standards.
Striking Appearance
Works powerfully, looks fantastic. LuvSide turbines are a great representation for sustainability, generating both electrical and marketing power.
Currently Operating
Countries
as operation sites
tons CO2
saved by LuvSide
Organisations
on board with us
Turbines
on & offshore
Power up your renewable energy transformation with LuvSide turbines
Learn more about purchase information and how you can integrate LuvSide into your renewable energy plans.
Want to team up with LuvSide as a distributor? Check out how to sell wind turbines as our distributor.